Welcome, visitor! [ Login

6ARC 105 testing – 105Nosler CCs, 108 Elite Hunters, 105VLDs

6ARC Load Development, AmmoSmith - Reloading Tips and Examples, Range Days 2021-12-06

Tested these 3 batches of ammo today.

Had some feeding issues with the Noslers.

elite hunters seemed to have accuracy issues.

VLDs seemed to be right on.

These were all ran right around 2600fps. Banged steel 6″ gong @200yds

I ended up holding -13MOA on the scope and holding the left edge to ring hits. Most fun was doing double and triple taps on the plate.

Brass Used was a mix of New, 1x and 2x fired Starline match prepped: converted 6.5 Grendel, annealed, neck turned, inner neck champhered and honed. Brass looked good, Flat primers, slight ejector mark. Max charge decided on previously, this was just to test functionality. Wolf SRM Primers and LeverEvolution.

I did have a few Failure to feeds on the 108 EHs Loading them in the mag they are very long and may need to seat them a bit deeper. It seems like the tips are hitting the top of the chamber and getting stuck and the bolt just rides over the lip to jam in the shoulder.

     

509 total views, 1 today

  

  • CZ97 Old vs New - .45ACP Double Fisted FUDDRUNNERS

    by on 2022-02-19 - 0 Comments

    So, I got bored and made a new video about new(to me) old CZ97B Safety model.I got some video editing practice. Digg the 97s (CZ FuddRunner) – it was a great day! The trigger action and shape of the older one has the slight nod, but the newer model has better sights and LOK grips(upgrade). […]

  • From YouTube to Rumble and found another great 6mmARC 1k build success

    by on 2022-01-16 - 0 Comments

    We all have things to work on… I try to be the person to at least think those words when disposition comes along. I’m starting to feel really great about breaking bad habits. In particular for today is You Tube… So I started up Rumble and what do you know one of the first things […]

  • 6mmARC Brass Forming From Straightwall Blanks

    by on 2021-04-13 - 0 Comments

    Disclaimer: do your own research and use common sense when reloading. I am not responsible for your results. Don’t try this at home or at home office either… Here are the steps that worked for me. I wouldn’t even attempt this without a great annealer. That thing is worth its weight in brass. Scope footage: […]

  • 1k Match Results

    by on 2021-06-30 - 0 Comments

    Executive Summary – it was windy, I learned a LOT about wind today. So windy in fact many of the more experienced shooters had issues with the wind. There was “supposed” to be an option for 1250 yds, but that was nixed due to wind. I have shot this gun 6ARC and ammo at 1k […]

  • 16.5" MaddMacs / Ruger Mk 4 pistol match ammo testing

    by on 2021-12-06 - 0 Comments

    Ive been looing forward to this test for a while and finally made it to the range to make it happen. The goal was to test High Velocity match ammo @200 and see if I could have a 50yd(or 100yd) zero and use BDC reticle out to 200yds. The Rig: Ruger Mk 4 lower gutted […]

  • 300PRC Ladder-loads and Initial Groups

    by on 2021-10-13 - 0 Comments

    Took the new Mile Rifle to Skyline to group in @ 200yds and run the 2n’d round of ladder loads. All rounds with H225 ELDM over 7828SSC or N565. I shot all but the hottest rounds for each powder, making a specific point to leave the hot rounds for next time – enforce the It’s […]